SteadyWeeks Free 8-week checkFree check

How much capacity should a plumbing business keep for emergencies?

How to size an emergency buffer from your own ServiceM8 history, a worked example, and how to plan the rest of the week around it.

The short answer

Keep about your average weekly hours of emergency work free in every week, and book planned jobs only into the rest. Work out the average from the last eight to twelve weeks in ServiceM8. There's no industry-wide right answer: your own history is the only number that counts.

What an emergency buffer is

A buffer is the hours each week you deliberately don't fill with planned work, so burst pipes, blocked drains and failed hot water systems have somewhere to go. Without one, every emergency pushes a booked customer back. With too big a one, plumbers sit idle on quiet days.

Step 1: Pull your history

From ServiceM8, list the jobs from the last eight to twelve weeks that were reactive: emergencies, same-day call-outs and anything booked for the day it came in. If you use a category such as "Emergency" or "Blocked drain", filter by it. Add up the hours spent on those jobs each week.

Step 2: Find your typical week

Take the average of those weekly totals. Then look at how often weeks ran well above it. A business whose emergency hours swing widely needs more room, or a plan for the big weeks, than one where they're steady.

Step 3: Set the buffer

Start with the average. If your history shows a season, for example more burst pipes in winter or more storm work at certain times of year, change the buffer by season rather than keeping one number all year.

Step 4: Plan into the rest

  • Book planned work only into the hours left after the buffer.
  • Release unused buffer a day or two ahead by pulling forward flexible work: maintenance visits, backflow tests, quotes.
  • Check each month whether the buffer still matches what's coming in, and adjust.

A worked example

A team of ten works 380 hours a week. Over twelve weeks their emergency work came to 52, 88, 61, 110, 70, 45, 96, 64, 58, 120, 75 and 66 hours, an average of about 75 hours. They keep 76 hours free each week, about 20%, and plan into the other 304.

Example: a plumbing team of 10 over 12 weeks, keeping 76 hours free each week
0110220330440Wk 1Wk 2Wk 3Wk 4Wk 5Wk 6Wk 7Wk 8Wk 9Wk 10Wk 11Wk 12
Example: a plumbing team of 10 over 12 weeks, keeping 76 hours free each week
WeekPlanned work (hours)Emergency work that came in (hours)Hours available
Wk 130052380
Wk 229688380
Wk 330461380
Wk 4290110380
Wk 530270380
Wk 629845380
Wk 730096380
Wk 828864380
Wk 930458380
Wk 10296120380
Wk 1130075380
Wk 1229466380

Made-up example numbers. Hover or tap a week for the detail.

In eight of the twelve weeks, emergencies fitted inside the buffer and nobody's booked job moved. In the other four they ran over by 12 to 44 hours, and the owner decided early on overtime or moving a flexible job, because the board showed it.

Questions

What is an emergency buffer?

The hours each week you deliberately don't book with planned work, so burst pipes, blocked drains and failed hot water systems have somewhere to go without pushing everything else back.

How big should an emergency buffer be?

Look at how many hours of reactive work you did each week over the last two or three months. Many owners start with the average and adjust from there. Our guide on emergency capacity walks through it with a worked example.

What happens when emergencies go over the buffer?

You make a call that week: overtime, moving a flexible planned job or asking a customer to wait. The point of the buffer is to make that the exception, not every week.

Keep the buffer without the spreadsheet

SteadyWeeks keeps your emergency buffer on every week of an 8-week board built from ServiceM8, and shows real room for planned work. See how it works for plumbing businesses.

Get my free 8-week check